TRIUMPH T140 BONNEVILLE TR7 T160 T150 60-3361 GOLD FRAME 'MADE IN ENGLAND' DECAL

TRIUMPH T140 BONNEVILLE TR7 T160 T150 60-3361 GOLD FRAME 'MADE IN ENGLAND' DECAL

£4.20
Skip to product information
TRIUMPH T140 BONNEVILLE TR7 T160 T150 60-3361 GOLD FRAME 'MADE IN ENGLAND' DECAL

TRIUMPH T140 BONNEVILLE TR7 T160 T150 60-3361 GOLD FRAME 'MADE IN ENGLAND' DECAL

£4.20

ORIGINAL TRIUMPH GOLD LETTERED SCRIPT 'MADE IN ENGLAND' DECAL FOR ALL POST 1969 MODELS COVERING BONNEVILLE TRIDENT AND HURRICANE 

PLEASE NOTE THE MANUFACTURER HAS ADDED A BLANKET IMAGE OF THE DECAL ON THE OUTER TEAR OFF PAPER MASK AS DEPICTED IN SECOND PHOTO. THE DECAL UNDERNEATH REMAINS THE SAME, BLACK EDGED SCRIPT & GOLD FILLED 

THESE ARE WATERSLIDE TRANSFER, IF YOU'VE NOT EXPERIENCED THEM BEFORE, SEE YOUTUBE FOR APPLICATION VIDEOS

Transfer Application Instructions: 

Prepare the surface

Make sure the surface is clean and free of dirt and grease.  

Prepare the transfer

- Decide exactly on the frame where you want the transfer because when you come to stick it, thats it, it won't slide in to position.

- Remove plastic protection from the transfer face. 

- Soak the transfer in Slightly Warm Water for about 10 seconds. (if you leave it too long the transfer will float free from the backing)

- Carefully take Transfer from water

- Using the stencil on the back as a guide place the Transfer in to position on the Bike (make sure its perpendicular because you only get one chance at this)

- Gently peel the backing from the Decal, the Decal should now be stuck to the bike. 

- Use a moistened finger to gently stroke the transfer and eliminate air bubbles.

TRANSFER SHOWN IN 2ND PHOTO IS AS YOU WILL RECEIVE IT, AND REQUIRES THE PLASTIC BACKING TO BE REMOVED TO STICK TO FRAME OR FENDER AS REQUIRED.

PART NUMBERS 60-3361 & 60-0061 also 99-3509

You may also like